Although it was fun to do, quite a few evenings of beading and un-beading went into the final make up of the design, which I thought I'd share, just in case you feel like experimenting too.
First, I worked a bezel for the stone combining Peyote and Albion stitch, using colours picked out from the stone. I worked one side in matt beads and the other in a more translucent shiny bead. It became pretty clear that the hole wasn't going to be hidden by the beading, and I wanted to keep as much of the stone on display as I could. The other thing that I noticed, was that the hole was pretty sharp edged which (I can feel you nodding), is death to beading thread.
The stone was also quite brittle, and likely to be damaged with any metal findings. After a bit of pondering, I sanded out the hole a bit and glued a double delica in as a lining. Now I had a smaller hole with nicely rounded glass edges. Enter the metal finding I have no name for; and which I only
seem to be able to buy in Europe... a metal rod with round beads at each end, one of which unscrews.
I used right angle weave to make a stirrup shape, which took up the space left either side of the bezelled stone quite neatly. Then I got carried away and added a ring of beads. This proved too small to fit anything through it, but I kind of liked the textures and shapes,
Now I had a lovely kinetic pendant, the stone swivels smoothly on the metal rod, but with no means of attaching it to anything, other than to bead directly off the little ring with more right angle weave, which is just what I did, colouring the rope to mimic the patterning of the stone a little.
I made a second stirrup and ring arrangement to attach to the other end of the beaded rope. Then I realised that, oops, I'd need a break in the rope to be able to thread an end through the second stirrup.
So, finally, the bones of the design came together into an asymmetric lariat, which I can adjust, depending on which top I am wearing. I'm also really happy that one more stone is released from the 'one day when' box so I can enjoy wearing it.
A slight problem, the gorgeous stone is actually quite weighty, on wearing the necklace I found myself in a gradual choke situation as the sliding stirrup slid a little until I was in danger of turning purple... back to the bead board and a couple of additions.
I worked units of raw on each face of the necklace part, and threaded on some little green jasper beads to link them, now I have two toggles that keep everything in place and the stirrup can't move beyond them.
Two? well one looked just plain odd, but a second one gave the design a little balance.